The quality of the 1050 aluminum plate is very important to our use. A substandard product cannot ensure the safety and life in use. Because its main element is magnesium, it is characterized by low density, high tensile strength and high elongation. It is widely used in furniture, aerospace, electronic product casings and other fields. Below we teach you to distinguish the quality of aluminum plate from 8 methods.

1. It is to see whether the 1050 aluminum plate has obvious distortion, whether the surface is smooth and flat, whether there are cracks or boldness, scratches, and burrs. If you find any, it is best not to buy it.

2. It is necessary to carefully check whether the surface color of the aluminum plate has different shades of color difference. If there is a color difference, it means that the quality is not good enough. Of course, profiles of the same type can also be put together for comparison. Of course, if the color difference is too obvious, it is best not to buy them. It is necessary to check whether the section thickness of the aluminum plate is the same as the marked model.

3. The gusset will be exposed to the sun for 3 days without fading or deformation.

4. Put the pinch plate in clean water for 7 days, it will not rust, the surface will not blister, and the bending will not peel off the paint.

5. The gusset plate is drawn with a small magnet, which does not attract each other and does not contain iron.

6. Use a micrometer to measure the thickness of the gusset, and the thickness is up to standard.

7. Whether the openings at the four corners of the gusset plate are closed, a good closure is the best.

8. Whether the surface of the gusset plate is flat (it is flat, not smooth, like the surface of the wire drawing board is textured).
 
For the poor quality mechanical frame 1050 aluminum plate on the market, consumers can use a simple method to identify the 1050 aluminum plate, so that you can use it better.