1. Conditions of use of 6063 aluminum plate china: The inner wall panel should be used indoors, and should not be installed outdoors to ensure the use effect and service life.

2. Aluminum plate installation direction: When installing the same color aluminum plate on the same plane, the process direction should be the same, otherwise it may cause visual color difference.

3. Aluminum plate tearing film: The protective film should be removed within 45 days after the aluminum plate is installed, otherwise it may be difficult to tear the film or remove the glue.

4. 6063 aluminum plate china batches: there may be color difference between the same model and different batches of plates. When selling and using different batches of plates, a process of comparing the color difference should be added. Our company mainly deals in alloy aluminum plates, aluminum checkered plates, etc. It can only be used on the same plane when there is a visual chromatic aberration.

5. Storage and handling of aluminum plates: The plates should be stored in a dry and ventilated place, and placed flat on a flat surface. Do not step on or hit the plates. When handling the plates, the four sides of the plates should be lifted at the same time. noodle.

6. 6063 aluminum plate china bending and arc processing: the bending force needs to be uniform, one-time forming, do not repeatedly bend, otherwise the aluminum plate may be broken, the processing arc should be processed with special bending equipment, and the force should be gradually applied to make the plate gradually reach the desired size. The desired surface. Do not bend the shape at one time.

7. Slotting of 6063 aluminum plate china: when using a slotting machine or a gong machine, a milling cutter with a semi-round head greater than 90 degrees should be used. The lower knife should not be too deep to hurt the aluminum plate, nor too shallow to make it difficult to fold the edge. , 0.2-0.3MM thick plastic core material should be left to bend together with the aluminum plate to increase the strength and toughness, otherwise the aluminum plate may break or the paint film may burst during the bending.