关于我们
Your location:
Homepage
/
/
/
6A02 Aluminum plate products Surface drawing process treatment

6A02 Aluminum plate products Surface drawing process treatment

(Summary description)The metal wire drawing solution is done on the stamping die. The metal wire drawing of 6A02 aluminum plate products can be made into straight lines, straight lines, external threads, waves and swirls according to the needs of decorative design.  

6A02 Aluminum plate products Surface drawing process treatment

(Summary description)The metal wire drawing solution is done on the stamping die. The metal wire drawing of 6A02 aluminum plate products can be made into straight lines, straight lines, external threads, waves and swirls according to the needs of decorative design.
 

Information

The metal wire drawing solution is done on the stamping die. The metal wire drawing of 6A02 aluminum plate products can be made into straight lines, straight lines, external threads, waves and swirls according to the needs of decorative design.

6A02 aluminum plate products
Straight line drawing refers to the parallel lines produced by mechanical friction on the surface of 6A02 aluminum plate products. It has a two-way function of removing scratches on the surface of aluminum plates and decorating the surface of 6A02 aluminum plate products. There are two kinds of metal wire drawing: continuous wire and intermittent wire. The continuous horizontal and parallel line friction can be carried out on the surface of the alloy aluminum with a continuous wire cloth or a stainless steel brush (when there is standard manual grinding equipment or a steel brush with a drill press for the aluminum brush). Different sizes of grains can be obtained by changing the stainless steel wire diameter of the stainless steel brush. Intermittent filaments are generally produced and processed on brush mills or erasers. The basic principle of the system: choose two groups of different driving wheels with the same rotation direction, the upper group of rollers rotates rapidly, the lower group of glue sticks rotates slowly, and the two groups of aluminum or aluminum alloy plate rollers are brushed to fine intermittent straight lines. .

Metal stripe wire drawing is a kind of irregular matte silk thread obtained by moving 6A02 aluminum plate products back and forth and rubbing under the high-speed copper wire brush. In this production process, the surface of the aluminum plate or aluminum alloy plate is higher.
 
Wavy lines are generally produced in a brush milling machine or an erasing machine. The brush on the surface of the aluminum or aluminum alloy plate is ground by the radial matching motion of the upper grinding roller to obtain the skipping rope pattern.
 
Optical rotation pattern, also known as optical rotation pattern, is a kind of silk pattern obtained by using cylindrical felt or stone nylon polishing wheel installed on the planer, mixing polishing grease with gasoline, and rotating the surface of aluminum or aluminum alloy plate. Mainly used for the decorative art production and processing of ring identification cards and small and medium-sized art deco watch cases.
 
The external thread is fixed on the table with a small motor, and there is an annular felt on the shaft, which is about 60 degrees away from the edge of the table. In addition, a tea tray with a fixed aluminum plate is made, and a straight edge PVC film is attached to the tray to limit the ethnicity of the external thread. Through the rotation of the felt and the parallel line of the support plate, the outer thread of the same width is rotated on the surface of the 6A02 aluminum plate products.
 
The sandblasting process is used to obtain light decorative patterns on the film surface or small vertical surfaces to meet unique design schemes such as mild gloss. A reasonable sandblasting process can also get rid of the common shortcomings of the aluminum profile surface.
 
For the appearance of the parts, whether it is treated with metal wire drawing or sandblasting, it is generally solved by surface air oxidation. As for which production process to choose, it should be a difficult problem to be considered in the shape design. The surface layer feeling that can be obtained by the two processing technologies is still different.
 
In addition, there is also a 6A02 aluminum plate products whose processing technology is similar to sandblasting, but also has a chemical corrosion method, also known as organic chemical sand decay solution or organic chemical sand surface etching, especially suitable for aluminum surface solution, sand surface Symmetry is much better than sandblasting. The surface etching of organic chemical sand can be divided into acid-base etching and alkaline partial acid etching. According to different organic solvents and sand surface agents, different surface colors and sand particle sizes can be obtained.
 

Keyword:

Scan the QR code to read on your phone

More

There is currently no information to display
Please add data record on website background.
There is currently no content to display
Please add data record on website background.

Address: Yulan Road, Development Avenue, Wuyi County, Jinhua City,

Zhejiang Province, China
Phone:
0579-87680816 / 87680818
Fax:0579-87680819
Phone:13905892867
Contact: Li Jian
Email:
lijian@ylly.net.cn

QR code

Copyright © 2021 Zhejiang Yilong Aluminum Co., Ltd.       浙ICP备11005348号-1

Search